Water-Based Release Agent for Precast Concrete
A water-based release agent for precast concrete components, including composite slabs, staircases, wall panels and bay windows. It is applied as a diluted emulsion to support uniform separation from casting tables and moulds.
Product Data
- Type
- Water-Based
- Application Range
- Precast concrete components
- Coverage
- 15-20 m²/kg after dilution
- Dilution Ratio
- 1:3 to 1:5; composite slabs 1:4 to 1:5; special-shaped components 1:3 to 1:4
- pH
- 7-9
- Appearance
- Milky white viscous liquid
- Composition
- Modified high-molecular polymer, separating agent and surfactant
- Product Type
- Concrete Release Agent
- Applicable Formwork / Mould
- Casting tables and moulds for precast concrete components
- Application Method
- Clean the mould; dilute with water; spray and spread evenly with a roller or sponge mop; allow the film to dry before pouring.
- Storage
- Store indoors in a cool place away from direct sunlight and rain.
- Additional Notes
- Do not over-apply. Stir diluted emulsion before use after prolonged standing.
Product Overview
This water-based release agent is intended for precast concrete production where a uniform film is required between concrete and the mould surface. The diluted emulsion is sprayed and spread evenly before concrete pouring.
Product Features
- Milky white viscous liquid.
- Designed for PC component demoulding.
- Applied after dilution with water and allowed to dry into a film.
Applications
Precast composite slabs, staircases, wall panels, bay windows and other PC components.
Application Method
Remove concrete residue from the casting table and mould. Dilute with water according to the component type, spray onto the mould, spread evenly with a roller or sponge mop, and pour concrete after the white emulsion has dried to form a film.
Storage & Packaging
Store indoors in a cool place away from direct sunlight and rain.
Precautions
Do not apply an excessively thick layer. Stir diluted emulsion before use if it has been left standing for a long period.
Applications
Clean the mould; dilute with water; spray and spread evenly with a roller or sponge mop; allow the film to dry before pouring.
Related Products
Concrete Mould Release Agent
View product details.
VIEW PRODUCT →
Concentrated Water-Based Release Agent for Precast Concrete
A concentrated water…
VIEW PRODUCT →
Oil-Based Release Agent for Precast Concrete
An oil-based release…
VIEW PRODUCT →
Water-Based Release Agent for Tunnel Segments
A water-based releas…
VIEW PRODUCT →Discuss This Product
Send the product and requirement details for follow-up.