Concentrated Water-Based Release Agent for Precast Concrete
A concentrated water-based release agent for precast concrete components. Dilution is adjusted for composite slabs and special-shaped components before spraying and spreading over the mould surface.
Product Data
- Type
- Water-Based
- Application Range
- Precast concrete components
- Coverage
- 15-20 m²/kg after dilution
- Dilution Ratio
- Composite slabs 1:6 to 1:10; staircases and wall panels 1:4 to 1:5
- pH
- 7-9
- Appearance
- Yellowish-brown oily liquid
- Composition
- Release oil, separating agent and surfactant
- Product Type
- Concrete Release Agent
- Applicable Formwork / Mould
- Casting tables and moulds for precast concrete components
- Application Method
- Dilute gradually with tap water, stir uniformly, spray onto the cleaned mould and spread evenly; allow the film to dry before pouring.
- Storage
- Store indoors in a cool place away from direct sunlight and rain.
- Additional Notes
- Conduct a small trial before selecting the dilution ratio. Stir diluted emulsion again after prolonged standing.
Product Overview
This concentrated release agent is prepared with tap water before application to precast concrete moulds. The mixing ratio is selected through a small trial based on component geometry and working conditions.
Product Features
- Yellowish-brown oily liquid before dilution.
- Dilution ranges are provided for composite slabs and special-shaped components.
- The prepared emulsion is sprayed and spread uniformly before pouring.
Applications
Composite slabs, staircases, wall panels and other precast concrete components.
Application Method
Use tap water only. Add water gradually while stirring until no oily particles remain. Spray the confirmed mixture onto the cleaned mould, spread it evenly with a sponge or cloth mop, and allow it to dry before pouring concrete.
Storage & Packaging
Store indoors in a cool place away from direct sunlight and rain.
Precautions
Conduct a small dilution trial before use. Stir again if the diluted emulsion has stood for more than 12 hours.
Applications
Dilute gradually with tap water, stir uniformly, spray onto the cleaned mould and spread evenly; allow the film to dry before pouring.
Related Products
Concrete Mould Release Agent
View product details.
VIEW PRODUCT →
Water-Based Release Agent for Precast Concrete
A water-based releas…
VIEW PRODUCT →
Oil-Based Release Agent for Precast Concrete
An oil-based release…
VIEW PRODUCT →
Water-Based Release Agent for Tunnel Segments
A water-based releas…
VIEW PRODUCT →Discuss This Product
Send the product and requirement details for follow-up.