Aluminum-Magnesium Alloy Release Agent
A water-based micro-emulsion release agent for aluminum-magnesium alloy die casting. It is also applicable to die-cast magnesium, aluminum and zinc alloy components.
Product Data
- Type
- Water-Based
- Application Range
- Aluminum-magnesium, magnesium, aluminum and zinc alloy die casting
- Dilution Ratio
- Reference ratio 1:80 to 1:200; adjust through practical trials
- pH
- 8-9
- Appearance
- Milky white liquid
- Stability
- Non-ionic type at 15-35°C for 24 h; no separation upon unlimited dilution; centrifugal stability <0.1 ml at 1,500 rpm/min
- Product Type
- Metal & Forging Release Agent
- Applicable Formwork / Mould
- Die-casting moulds for non-ferrous alloy components
- Application Method
- Dilute, stir thoroughly and spray directly onto the mould. Adjust the ratio to actual equipment and component conditions.
- Packaging
- 25 kg/drum; 200 kg/drum
- Storage
- Store upright below 45°C in a cool, ventilated and dry warehouse. Keep away from heat, acids, alkalis, oxidants and direct sunlight.
- Additional Notes
- Complete degreasing and required surface treatment before subsequent processes such as electroplating.
Product Overview
This release agent is used for lubrication and demoulding in non-ferrous alloy die casting. The diluted material is stirred and sprayed onto the mould, with the final ratio adjusted to the component and equipment conditions.
Product Features
- Water-based micro-emulsion.
- Designed for aluminum-magnesium alloy die casting.
- Applied by spray gun after dilution and stirring.
Applications
Die-cast aluminum-magnesium, magnesium, aluminum and zinc alloy parts, including electronic housings, precision parts, automotive components and lighting hardware.
Application Method
Dilute with distilled water where practical, stir thoroughly and spray directly onto the mould. Adjust the ratio according to the component geometry, equipment and trial results.
Storage & Packaging
25 kg and 200 kg drums. Store upright in a cool, ventilated and dry warehouse below 45°C, away from heat, acids, alkalis and oxidants.
Precautions
For parts requiring subsequent electroplating or similar processing, complete the required degreasing and surface treatment first.
Applications
Dilute, stir thoroughly and spray directly onto the mould. Adjust the ratio to actual equipment and component conditions.
Related Products
Concrete Mould Release Agent
View product details.
VIEW PRODUCT →
Water-Based Release Agent for Precast Concrete
A water-based releas…
VIEW PRODUCT →
Concentrated Water-Based Release Agent for Precast Concrete
A concentrated water…
VIEW PRODUCT →
Oil-Based Release Agent for Precast Concrete
An oil-based release…
VIEW PRODUCT →Discuss This Product
Send the product and requirement details for follow-up.